RUGER 10/22 THREADED BARREL UPGRADES

Despite the legal obstacles firearm silencers have become main stream for today’s shooter. Nowhere is this more apparent then on .22 rifles and handguns. .22’s are wonderful to silence because .22 silencers are pretty inexpensive and very effective. With proper subsonic .22lr ammunition a .22 can be more quiet than an air rifle. This brings us to the subject at hand. Ruger 10/22 threaded barrels. The Ruger 10/22 is arguably the most popular and quite possibly the best selling .22 rifle of all time. Ruger 10/22 threaded barrels are money in the bank for both Ruger and aftermarket 10/22 barrel manufacturers.

RUGER 10/22 THREADED BARREL 18-1/2

RUGER 10/22™ THREADED LONG RIFLE BARRELS 18-1/2

RUGER 10/22 THREADED BARREL 18-1/2″

Ruger 10/22 threaded barrel is 18-1/2″ long with a 1:16″ RH twist. Precision-rifled, cold hammer-forged alloy steel barrel features a 1/2″-28 threaded muzzle. Barrel is fitted with a .406 high gold bead front sight, a flip-up rear sight assembly and a thread protector. Blued finish.

Ruger 10/22 Takedown Threaded Barrel

Ruger 10/22 Takedown Threaded Barrel is 16-5/8″ long with a 1:16″ RH twist. Precision-rifled, cold hammer-forged alloy steel barrel features a 1/2″-28 threaded muzzle. Barrel is fitted with a .406 high gold bead front sight, a flip-up rear sight assembly and a thread protector. Barrels available in blued or stainless steel finish.

Ruger 10/22 Takedown Threaded Barrel

KIDD 10/22 Threaded Barrel

KIDD 10/22 Threaded Barrels are in my opinion the best aftermarket Ruger 10/22 rifle barrels available. KIDD quality does not end with Lothar Walther of  Germany barrels. In fact that is only half of the story. KIDD’s finish work on the barrels is every bit as good as Lothar Walther. All KIDD .22 rifle barrels are available with an option for threading.

I own a few KIDD 10/22 barrels. They are my “Go To” when nothing but the best will do.

KIDD 22LR 10/22 Ultra Lightweight Fluted Threaded Rifle Bull Barrel

Another superb aftermarket barrel for the .22LR by Kidd Innovative Design. This Ultra Lightweight Fluted 10/22 Threaded Bull Barrel weighs just over a pound and is a great shooter!  KIDD has found a niche barrel market for an ultra lightweight threaded 10/22 barrel and believe customers will benefit from a durable steel barrel anchored by a stainless steel breech and stainless steel muzzle design.  The bore is hand lapped here at KIDD.

 At 1.25 pounds and 16 1/4 inches in length this KIDD’s lightest  10/22 threaded rifle barrel. KIDD product testing has resulted in 1/2″ groups at 50 yards.  Though, KIDD Innovative Design doesn’t guarantee this barrel to group at that rate.  A threaded muzzle is an option on the barrel and our threading is 1/2″-28 and is available with a protective cap or muzzle brake.

The threaded version will increase length slightly to 16 3/4″ and our ultra lightweight barrel with our aluminum muzzle brake will be 18 1/4″ in overall length.  This aftermarket 10/22® barrel will drop into any bull barrel channel rifle stock and will look like it was custom made for it.

KIDD 10/22 .22LR Match Stainless Steel Rifle Bull Barrel

This 10/22 threaded bull barrel is the ultimate performer in accuracy. Stainless steel material along with a unique manufacturing procedures guarantee that this match barrel will group 1/2″ at 50 yards. This bull barrel will slip into your Ruger® 10/22® receiver or other aftermarket 10/22® receiver. This 10/22 threaded barrel comes in three lengths 20″, 18″, 16.5″ and the stainless steel finish is offered in a polished or bead blast. The best things about these match bull barrels are their simplicity. They tend to be more nose heavy then our other barrels but in this way they create an advantage while target shooting. The advantage is created by slowing down the movement of the rifle as a whole. When the rifle movement is slow the target appears for a longer amount of time in the scope.
Barrel weight: 20″ match barrel= 3 pounds 5 ounces,18″ match barrel= 3 pounds 3 ounces,16.5″ match barrel= 3 pounds 1 ounce
 KIDD stainless steel barrels are bored and rifled by Lothar Walther in Germany. Tony Kidd then performs all the final machining to make this match barrel a worthy KIDD product. A proprietary chamber reamer is used to ensure the cartridge and bullet feed smoothly. Barrels are chambered to accept .22 LR ammo and have a 1:16 twist. Muzzle threading is 1/2″-28 and is available with a protective cap or muzzle brake.

 

KIDD .22LR Black Bull 10/22 Threaded Barrel

KIDD chromemoly blued barrel is a great black barrel option!  These are some of the finest barrels on the market, each one is hand lapped.  Our barrel is bored and rifled by Lothar Walther in Germany.  KIDD then performs all the final machining to make our match barrel a worthy KIDD product.  A proprietary chamber reamer is used to ensure the cartridge and bullet feed smoothly.  KIDD 10/22 threaded barrels are chambered to accept .22 ammo and have a 1:16 twist.  The unique convex extractor slot practically eliminates extraction problems by ensuring the extractor is always in perfect alignment with the case rim.  Why doesn’t everybody use this convex extractor slot?  Because the tooling is very expensive and requires tolerances be held very close for proper machining.  Each barrel receives an 11 degree crown and the double ring at the muzzle end with KIDD marked on the barrel.1/2″ at 50 yards 5 shot group guarantee

KIDD .22LR Tapered Stainless Steel, Chrome Moly 10/22 Threaded Rifle Barrel

20 inch stainless steel straight or chrome moly taper barrel, that slips into a 10/22® receiver. Straight tapered barrel is not as small at the muzzle as the factory taper, because KIDD found that amount of taper to negatively affect the barrel’s accuracy abilities. With a .700 muzzle KIDD can still guarantee a 1/2″ group at 50 yds. Even though this is a 20″ barrel the balance point for the rifle is very close to the shooter’s body due to the taper.

KIDD Innovation offers their premium Ruger 10/22 threaded barrels made to the same specifications as their other 10/22 threaded barrels.

  • KIDD .22LR Black Fluted 10/22 Threaded 10/22 Bull Barrel

  • KIDD .22LR Fluted Stainless Steel Threaded 10/22 Bull Barrel

  • KIDD .22LR Lightweight Fluted Aluminum Sleeved Threaded 10/22 Bull Barrel

  • KIDD .22LR 18″ Specialty Fluted Stainless Steel Threaded 10/22 Bull Barrel

  • KIDD .22LR 18″ Black Specialty Fluted Threaded 10/22 Bull Barrel

  • KIDD .22LR Lightweight Specialty Fluted Aluminum Sleeved 10/22 Bull Barrel

FJ Fedderson 10/22 Threaded Barrel

The FJ Fedderson 10/22 threaded barrel is manufactured from heat treated chome moly steel and button rifled using a patented gun drilling technique. The results of their unique processes and precision are a superior shooting 10/22 barrel.  Bore will be uniform and the barrel is perfectly round.  The barrel is finished with a matte black finish.  This heavy contour, .920″ diameter barrel features a 1-16 twist and a threaded muzzle.  Muzzle is threaded 1/2-28. SPECS: Fits – 10/22 rifles.  Chrome moly steel, matte black finish.  1-16 twist.  Weight – 2 lbs 13 oz.

Beyer Barrels Ruger 10-22 Threaded Barrel

Beyer Barrels Ruger 10/22 Threaded Barrel

Beyer Barrels Ruger 10/22 Threaded Barrel

Match-Grade Performance Without The Weight Penalty Of Steel – Premium-quality aluminum alloy barrel gives the rigidity, stability, and performance of a steel bull barrel without the excess weight. Lets you build a tack-driving target rifle from an affordable, easy-to-obtain Ruger® 10/22® action. Fully machined to precise, match-grade tolerances from exceptionally hard 7075 aluminum billet that’s actually stronger than many mild steel alloys, yet gives all the benefits of a thick barrel, including improved heat distribution to resist accuracy changes due to barrel heating. Custom match chamber in .22 LR or .17 HM2, and button-rifled Chromalloy steel liner with precise 1-16″ rifling for excellent accuracy, even from 60-grain subsonic .22 LR ammo. Barrel shanks are oversized to .001″ and may require minor fitting; .17 HM2 barrel requires a heavy bolt or bolt handle assembly, available separately. Tough, durable, good-looking Cerakote™ ceramic finish resists corrosion, scratches, and surface wear. Recessed target crown protects the rifling at the muzzle. 1/2-28 TPI muzzle threads accept a variety of AR-15/M16 flash hiders and muzzle brakes. .750″ diameter barrel accepts standard AR-15/M16 gas blocks for extra mounting options. Factory taper barrel provides a stock 10/22 look, a lightweight package.

%d bloggers like this: